Mini One Kit

Eibach Pro Kit Springs Mini Cabriolet 2004-2007 R52 One / Cooper / Cooper S


Eibach Pro Kit Springs Mini Cabriolet 2004-2007 R52 One / Cooper / Cooper S
Eibach Pro Kit Springs Mini Cabriolet 2004-2007 R52 One / Cooper / Cooper S

Eibach Pro Kit Springs Mini Cabriolet 2004-2007 R52 One / Cooper / Cooper S    Eibach Pro Kit Springs Mini Cabriolet 2004-2007 R52 One / Cooper / Cooper S
This product page has been automatically translated. If you have questions, feel free to contact us. Eibach Pro Kit-performance suspension springs. For Manufacturer and Model: for manufacturer and model: mini cabrio (r52) convertible 07.2004-11.2007 years. Axle load in kg front / rear: max. Axle load in kg front / rear: 890/800. Descent in mm in / out approx. Types of engines: types of motors: one / cooper / cooper. Certificate / abe: Certificate / abe: certificate with parts subject to registration! Carton in mm: carton in mm: 636x377x170. Weight in kg net / gross: weight kg net / off: 6.480 / 6.980. Notes: please read the yellow table below!

Tips: please read below the yellow table! Eibach Pro-Kit performance suspension springs our best salesman par excellence. The first choice of motor sports fans around the world. Optimum handling lowering the center of gravity up to 40 mm progressive suspension characteristics of the quality of optimum driving component of the pro-b12 eibach kit. Eibach Pro-Kit Performance Springs # 1 choice of car enthusiasts in the world!

Handling high-performance, lower center of gravity - lowers vehicle up to 1.5 (40mm) Progressive spring design Excellent ride quality is part of the kit eibach b12 pro. Example of registering a vehicle.

How to check if this product is right for my vehicle? Three simple steps you can check yourself with your registration certificate and the vehicle registration document. An example of a new registration certificate can be found as an example of image added to the description of the above article. With the four hsn numbers (MPN) and the 3-digit tsn (type the code, the first 3 characters) you can check what items of our shop fit your vehicle and you agree.

See entry above in the list of vehicles! You will find these numbers under 2.1 and 2.2 in your party registration certificate i (vehicle registration), our above photo red highlighted. Please check the following axle loads to the front and back and compare them with our description.

In your registration certificate (vehicle registration), they are listed under 7.1 and 7.2 listed. (You can find it in the example image \Ultimately, it remains built and notes to ensure, the year of construction must be within the time window specified by us years building you will find this information in our data table at the top of the line \for manufacturer and model \If different or if you are not sure, please ask our qualified service team! Table notes: please refer to the product description above for the relevant information.

German: if it is not specified separately, the reduction specified in the catalog is reduced by the amount of the plant cut for vehicles with sports suspension from the factory. If they are not listed separately, vehicles with higher ex-factory chassis (eg off-road character, crossover or rough roads) are excluded from the use of our products. In allocating item / vehicle parts certificate information or abe are crucial.

To that end, the approval number in this type k on the registration certificate of the vehicle or on the rating plate of the vehicle! Must be compared to the information contained in the report.

Before installation, please check with a certificate of rooms / abe if the items delivered (see Parts Identification) are approved for your vehicle (see Scope). In case of discrepancies, the parts must not be installed - in this case, please contact the seller. We recommend that our products are installed only in a qualified workshop with the appropriate qualified personnel and special tools required. You can \The number should not be upside down.

Once the spring components / chassis installed, it is imperative to check the wheel settings. If the serial shock absorbers are not fully functional and have significantly weakened their effect, we strongly recommend replacing them with new set of shock absorbers or sports dampers. If you need new shocks, we will be happy to advise you. With Sportline springs we recommend the sports dampers installation such as Bilstein B8.

All wheel / tire combinations which have been approved by the wheel types inspection stations can be used. The conditions in the wheel or report abe wheels must be met, with the exception of the requirement of a standard chassis. Depending on the engine, transmission, equipment and vehicle tolerances, lowering may deviate a few mm specified values.

The amount of the reduction is always reduced by the amount of a factory lowering. The friendliness of our products relates to vehicles left in series. For conversions and special accessories also applies to standard accessories! Such as the installation of a special brake system (e.

G, ceramic braking system), central locking wheels, sport suspension, gpl system, etc. Our products may not be usable. The dimensions refer to new vehicles made in series. Measurement points: vertical distance between the center of the wheel hub and the bottom edge of the wing. Basically, the specified dimensions are target values, which may vary depending on the vehicle. If the standard suspension electronic control of the shock absorber, its functionality is not available when using b12 suspensions or pro street s. An authorized workshop can disable the error message displayed on the onboard computer. If available for your vehicle, we recommend using pro-tronic to remove the error message. The spring plates installed at the factory are available in 8-23 mm thick in the db workshops. This allows to vary the lowering specified here.

With 205/50/15 tires and rims 7 days x 15 - recommendation: installation of sports identical gas shocks. If necessary, please ask for a source to our headquarters. Not usable with lower factory.

Special equipment considered here includes the following point system: air conditioning automatic transmission 7 points 4 + 5 cyl. Automatic transmission 4 points 6 cyl. 2 additional heating points 3 points roof opening 2 points 2 points abs airbag 1 point cleaning system headlight 1 protection point of the engine 1 point seat electronic control 2 points of the combination of equipment additional over 4 extra points, the lowering kit must be used for vehicles equipped with special equipment. The choice of the rubber pads results in the following values: 7 points included to 8 mm (1 nub) to 13 points including 13 mm (2 nubs) to 21 points including 23 mm (4 nubs) over 21 points down kit is not suitable for this version. Except vehicles with level control. The 6-cylinder motor vehicles must be converted into sports dampers. Except vehicles with AWD / 4x4. Except vehicles with adjustable damping force electronically controlled. For a lowering of more than 40 mm and a diameter of the drive shaft upper right 42 mm, eventl. The series stabilizer can be replaced.

The stabilizers set required here is available as eibach reference. E40-85-005-01-10 available in well-stocked specialty stores. Unless special models \Braking pressure regulator depending on the suspension on the rear axle must be controlled in accordance with specifications Workshop Manual and, if necessary, be reset. The dampers of hectares should be replaced with dampers provided.

On vehicles equipped with fog light and a combined position of fire, make sure the bottom edge of the projector is less than 350 mm above the ground. If this is the case, additional position lights shall be installed above this dimension.

Standard position lights must then be turned off by removing the bulb and disconnecting the cable connection. Not suitable for the model variant \Only for vehicles having the following properties: will: spring steel, ha: control level. Not suitable for version colt rallyart of 2009.

Check: this kit fits: 10. Turnover = letter a, b .... Increased axle load for the operation of the trailer (see certificate parts).

If there is a license for personal use, an acceptance according to §19 / 2 StVZO is required. Not suitable for version 1.6 Racing (DS3). If necessary, please contact us after purchase. Not for version \Also for the version \Only for vehicles with PASM (electronic control of the shock absorber).

For vehicles with multi-link rear axle (wheel independent suspension). For vehicles with rear axle twist beam (rigid axle). The M1G vehicles (ATVs) should be rewritten as M1 vehicles (passenger cars). For vehicles without chassis amg.

For vehicles with chassis amg. Not for version \It may be necessary to replace the spring plates. With e8530-140 kit, existing spring plate may have to be exchanged against the original spring retainer No: 1ho412341. For e8547-140 sets and e8550-140, the existing spring plate may require can be replaced with the original spring plate No: 357412341a.

Only for vehicles without air suspension. For export only, not available in Germany. For version with long wheelbase.

Not for \Not for version \For petrol engines with manual transmission. For petrol engines with automatic transmission and diesel vehicles.

For vehicles without abc (active body control). Only for vehicles with frame serial s-line. Only for vehicles without chassis s-line series. Only for vehicles without sports suspension more without drc - dynamic ride control. Only for vehicles with sport suspension plus with drc - dynamic ride control.

Not for version \Only for vehicles with extension of autonomy. Not for \Not for version \Service information: please refer to the product description above for the applicable instructions. English: if it is not named separately for vehicles with lowered suspension ow, lowering the size is reduced by the lowering performed by the manufacturer dimension. If they are not named separately, vehicles with original suspension lift (eg off-road group, crossover) are excluded from the use of our products.

The specifications in the approval concerning the classification of the article / vehicle. Please check the registration number of your car and comparing with the approval. Letter k in your vehicle registration certificate or find on the rating plate of your car!

Mounting - we recommend to install our spring system by a qualified workshop only, that has skilled personnel and special tools required. Installation - you can read the spring mounting position from the imprint - have them installed just the way you read the imprint. Setting the wheels - after the installation of the spring / suspension complete, it is necessary to check the adjustment of the wheels. Shock absorbers - if the standard shock absorbers operate more fully and that their effectiveness has diminished considerably, we strongly recommend to replace them with new standard shock absorbers or by sports shock absorbers. The performance of the new lowering suspension will be without optimal results using old dampers, solid or broken. If you need new shocks, we can help you if necessary. The installation of Sport-Shock absobers is recommended. For example Bilstein B8 Here all wheel / tire combinations are possible, which are released by the wheel type testing institution. Wheels approval of the instructions should be followed except for: an original suspension is required.

Depending on engine, gearbox / transmission, lower tolerances of the equipment and the vehicle may differ from the indicated values. The drop size is reduced by lowering the size performed by the manufacturer. The applicability of our products around the standard cars. In all cases of reconstruction (even with original accessory parts) as the installation of an accessory braking system (e. Ceramic brakes), a sports suspension, lpg system (gas LPG), for example, the use of our products may be excluded.

The measures indicated refer to new standard cars. Measurement points: vertical distance between the center of the wheel hub and the bottom edge of the wing mud. Typically, measurements are nominal values, which may vary according to each car. You will see a trouble code. This can be reprogrammed by a garage / Official dealer.

If available for your vehicle, we recommend using pro-tronic to prevent the fault code. The spring plates installed by the manufacturer are available in the db specialist workshops in sizes 8-23 mm. This allows to vary the lowering indicated here. For pneumatic equipment 205/50/15 and rim 7d x 15. Recommendation: Installation of gas pressure dampers sport similar construction.

The part number is available only from our special distributor. Please ask for availability and price. For vehicles not lowered by the manufacturer. The special equipment mentioned below contains the following point system: air conditioning 7 points automatic transmission 4 + 5 cyl.

2 points independent heating of the car 3 points sunroof 2 points abs 2 points airbag 1 point cleaning system headlights one plate point of engine protection 1 electronic control point of the seat 2 if the result is more than 4 points should be selected up to 7 points 8 mm (rubber plate 1 point) to 13 points (13 mm rubber plate 2 points) to 21 points 23 mm (4 points rubber plate) over 21 points kit lowering is not possible for this release. The 6-cylinder motor vehicles require modification with sport shocks.

When the car is lowered by more than 40 mm in combination with a shaft diameter of transmission greater than 42 mm, before the stabilizer originally equipped bar must be replaced by the part eibach anti-roll-kit. Except the \Braking pressure regulator depending on the travel of the spring on the rear axle must be inspected and, if necessary, adjusted according to the service manual.

The original rear dampers have to be replaced by the shock absorbers provided. Vehicles with fog and combined beam lights should be checked if the height of the lower edge of the fire is not less than 350 mm from the ground. In this case, additional traffic lights should be mounted above 350 mm. The original traffic lights must be turned off by removing the bulbs and the cable connection. Not suitable for the model \Only for vehicles with the following features: front axle: steel spring, rear axle: Control upgrade.

Excluded colt rallyart until 2009. Please check your lvl: this kit fits: 10th character = letter (a, b ,. Increased axle load when using the trailer (see approval). If there is a national approval of individual type, it is necessary to approve a change in acceptance in accordance with §19 / 2 StVZO.

No TYPE: 1.6 Racing (DS3). Please contact us after purchase. Not for \Engines \Only for cars with PASM (electronic damper control). For cars with independent suspension at the rear axle. For cars with dynamic rear axle.

The vehicles of category M1G (offroad) should be reclassified m1. For vehicles without suspension AMG.

For vehicles with suspension AMG. The spring plate can be changed! - The kit may require e8530-140 ow-spring-flat no. The e8547-140 kits and e8550-140 may require ow-spring-flat no. For vehicles with EDC (Electronic control of the damper).

Export only - not available in Germany - only without certificate components! For petrol engine with manual transmission. For gasoline engine with automatic transmission and diesel vehicle. Not for \Only for vehicles with s-line suspension.

Only for s-line suspension without vehicles. Only for vehicles without sports suspension and more without drc - dynamic ride control. Only for vehicles with sports suspension plus, including drc - dynamic ride control. Not for \Only for vehicles with range extender. Not for \Items of interest to you.

Suspension springs eibach pro-kit for BMW 3 series e46 limo 02.1998-04.2005 970/1100 kg. Bumper protection rgm black abs original Dacia Sandero also step ii of 2012. Bumper protection rgm black origin abs ford kuga i suv break 03.2008-02.2013. Protection bumper rgm abs original smooth black vw t5 m. Original protective rgm board abs black smooth loading t6 vi vw hatchback 04.2015.

Bumper protection rgm black abs original vw golf vi convertible from 03.2011 year of construction. Bumper protection rgm black abs original Opel mocha x SUV facelift 07.2016.

Ean: gtin: 4050278104500 German English has. General information 7 9 12 October 15 without complete equipment. 16 18 19 20 21 26 32 42 44 56 58 59 60 63 14 65 of the addendum 66 to the 5-seater 67 version 7 seats 68 69 71 72,102,159 without EDC 162 163 168 170 171 179 181 182 183 184 193 210 211 212 213 spring curled 219 231 232 234 236 237 239 240 243 244 246 247 248 249 a. Commonnotes July 9 10 12 15 paces fully equipped.

16 18 19 20 except vehicles with 4x4. 21 26 32 42 44 56 58 59 60 63 65 66 to 5 places 67 for 7 seater 68 69 71 72 102 not RV 159 without EDC 162 for \sti to \One / Cooper / cooper. Achslast in vorne / hinten 890/800 kg. The item \suspension, steering \ springs \The seller is \This item can be shipped to the following countries: Europe.
  1. oe reference number: a vehicle style, focus convertible performance kit <\/ li>
  2. product group: suspension <\/ li>
  3. Unit amount: 4 <\/ li> kit
  4. placement: back <\/ li>
  5. Country of Manufacture: Germany <\/ li>
  6. ean: 4050278104500 <\/ li>
  7. type of product: the helical springs <\/ li>
  8. Part Number Manufacturer: e10-57-001-03-22-b <\/ li>
  9. Manufacturer warranty: 2 years <\/ li>
  10. Manufacturer: eibach <\/ li>
  11. brand - no brand / generic - <\/ li> <\/ Ul>
    Eibach Pro Kit Springs Mini Cabriolet 2004-2007 R52 One / Cooper / Cooper S    Eibach Pro Kit Springs Mini Cabriolet 2004-2007 R52 One / Cooper / Cooper S